Specifications for petition.
When the ballot title has been established for a proposed initiative measure, the persons proposing such measure may prepare blank petitions, printed on single sheets of paper of good writing quality no smaller in size than eight and one-half (8 1/2) inches in width and eleven (11) inches in length and no larger in size than eleven (11) inches in width and seventeen (17) inches in length, with a margin of at least one (1) inch at the top.
The paper used for the petition sheets must be of sufficient weight and quality to accommodate printing and writing on both sides. Paper size should be between eight and twelve inches wide and between eleven and eighteen inches long. Printing should be no smaller than ten-point face, except that the text of the measure may be in smaller type if necessary to allow the entire petition to be on a single sheet of paper. For reasons of length of text or other practical necessity, the specifications of this section may be adjusted as the sponsor and city clerk may agree.